Tofu60 Redux kit

⚡Limited In-stock
SKU: ZH12524
by KBDfans


  • Case: Anodized Aluminum, E-coating Aluminum or Acrylic
  • Structure: Tray-mount
  • PCB: 1.6 mm non-flex cut Solder PCB with RGB underglow. USB-C, supports QMK / VIA
  • Weight: approximately 1 kg (non-brass weight bar)
                approximately 1.3 kg (with brass weight bar)
  • Plate: brushed Brass, anodized silver Aluminum, Polycarbonate
  • Typing angle: 7 degree
  • Price range: 89~140 USD/each
  • Link to Tofu60 Redux case

Comparison with Tofu60 1.0

  1. Sandblasted brass weight is added internal, the weight is increased
  2. Replace the round rubber feet with long strip rubber feet
  3. Two detachable golden stand-offs located in the middle and bottom of the case interior
  4. To tackle the issue with USB port placement, the USB port has been redesigned. It is now a movable sider to accommodate Standard GH60 PCB's and Wooting 60 HE's port alignment. Its functionality allows for USB port to aligned correctly for fit various implementations.

    Note: The $5 discount code (LOVEKBDFANS) is not valid for the Tofu60 Redux.


  • Case (with USB blocker) x1
  • Plate x1
  • Solder PCB x1
  • Bottom foam x1
  • Foam pads x1 set
  • Long strip rubber feet x1 set
  • Screws x1 set

Optional accessories

  • Brass weight bar x1 (+$25 USD)



  • The 1.6mm PCB will arrive around Mar 10th. (2024-2-21)
  • The pre-order will ship around April 5th due to the PCB delay (2024-02-5)
  • The pre-order colors will ship around Jan 25th(2024-01-12)
  • All pre order color cases will be in stock around Dec 18th (2023-12-04)
  • The pre-order will ship in 2 weeks, added 5 new color options.(2023-11-18)
  • The pre-order will ship in 2 weeks, the new colors case will start production.(2023-11-09)
  • The solder version PCB is still under production and will restock around 3-4 weeks late (2023-10-14)
  • The pre order cases will ship in 1-2 weeks after order placed (2023-10-13)
  • Will finished production around the end of Sept.(2023-09-22)
  • Part of the colors start shipping (2023-08-29)
  • Estimated shipping date: September 2023
  • Release Date: 2023-07-07

    •  Since the USB position of Wooting60he is different from the GH60 PCB (deviation is about 1mm), to compatible with both the wooting60he and dz60 PCB, we changed the USB port cut-out to a removable slider, and this extra part will match the case color you pick (2023-06-27)

  • The prototype has been confirmed, it is in production now (2023-06-14)


QMK Flash Manual: Link

VIA firmware: DZ60 v2 flex cut PCB


1. Keyboard case - If you see any resemblance of marks or foreign material under 2 mm (tool marks, stain, dent, sand mark, scratch, etc.), you're not eligible for Return & Refund.

2. Brass weight - If you see any resemblance of marks or foreign material under 2 mm (tool marks, stain, dent, sand mark, scratch, etc.), you're not eligible for Return & Refund.

3. Case interior - Based on the production method of anodizing and spraying, the product can lead to some smearing at the surface level, and you'll see some hook marks within the case. Also, the spraying process can not guarantee that the color will look 100% the same on the internal case corners. The color off on the interior case and the interior corners are not eligible for Return & Refund.

4. About the potential coating defects: Because the Faraday cage exists for this type of production method, it's going to be hard to coat the Interior corners perfectly. Insead of kill all the smoothness on the case coating, the interior painting job won't be as perfect as the exterior's.

-Make sure to QC your keyboard case and weight before building it. For any issues besides the three above, please get in touch with our customer support agents to get help.
-For anything built is not eligible for Return & Refund.

Click for more

3D preview

Explosion diagram