$65-$6 shipping code: Wafflebetter

Ko-Onibi 60% Keyboard kit

$0.00
SKU:
Product details

A 60% keyboard inspired by Japanese shrine architecture, sharing the Onibi TKL’s design language.

Black Ko-Onibi keyboard on a charcoal deskmat, with a softly lit Japanese lantern on the desk

Designed by Serajiman in collaboration with KBDfans, Ko-Onibi is the 60% model in the Onibi series. The case retains the curved front edge and layered side profile of the Onibi TKL, with proportions redrawn for the smaller layout.

The name means “Little Spirit Flame.” Like the original Onibi, the design takes inspiration from Japanese folklore and Shinto architecture.

Side profile of a silver-gray Ko-Onibi with light keycaps, showing the layered case silhouette

Case design

CNC-machined aluminum with rounded edges and a curved front lip.

Close-up of the black Ko-Onibi front corner and curved case edge
Close-up of the Ko-Onibi upper corner, keycaps and balanced case bezel
Ko-Onibi case interior with the dedicated daughterboard installed between the copper ribs

Tofu60 3.0 compatibility

Ko-Onibi uses the Tofu60 3.0 internal design, so the Tofu60 3.0 assembly fits directly into the Ko-Onibi case.

When transferring the assembly, use the dedicated Ko-Onibi daughterboard.

Ko-Onibi underside with the engraved clouds and Onibi spirit flame on the through weight

Through Weight

The internal ribs and exposed rear section are machined as a single piece. The ribs draw on the layered timber construction of traditional Japanese architecture.

The exposed rear is engraved with Japanese cloud motifs and the Onibi spirit flame.

Mounting system

Exploded view

PTFE force-break pad

Underside of the Ko-Onibi top case showing the PTFE force-break material at case contact points

PTFE pads sit at contact points between the top and bottom cases to reduce direct metal-to-metal contact.

Top mount

Exploded Ko-Onibi top-mount case with the plate and PCB assembly visible

Optimized TOP Mount Structure

To minimize resonance and hollowness, the mounting points for the TOP structure are strategically placed to avoid the spacebar area. This results in a more uniform and satisfying sound signature.

Top Case Mount Silicone Dampeners

Silicone dampeners provide complete physical decoupling of the positioning plate from the upper housing. This design mitigates resonance conduction at its origin, significantly reducing structural noise.

PCB gasket mount

Exploded Ko-Onibi PCB gasket mount with the decorated PCB, silicone supports and lower case

Engineered for Softness

Following a similar support distribution as the TOP Mount, the PCB Gasket is designed to provide a maximally soft, bouncy, and flexible typing experience.

Plateless Build Potential

Combine this mount with the solderable PCB to assemble your board without a plate. This "plateless" configuration is the ultimate choice for achieving maximum flex and a unique, deep sound profile.

Configuration

Case colors

Anodized aluminum

Ko-Onibi Black anodized color study, showing internal and external weight views

PCB & Foam

Wired · Hot-swap / Solder

Plate & Weight Bars

Layouts

2U1.5U1.5U1.75U1.75U2.25U1.25U2.25U2.75U1.75U1.25U1.25U1.25U6.25U1.25U1.25U1.25U1.25U1.5U1.5U7U1.5U1.5U1.5U1.5U7U1.5U1.5U1.5U7U1.5U WKWKWKLHHKB

Videos are on the way

Videos are on the way

Related accessories

Onibi Deskmat

Cloth surface, non-slip rubber base and stitched edges.

900 × 400 × 4 mm

Product details

Form factor
60%
Layouts
WK / WKL / HHKB
Case
CNC aluminum
Mounting
Top mount / PCB gasket mount
Weight system
Through Weight
Connection
USB-C
Daughterboard
Custom magnetic pogo-pin design
PCB
Hot-swap (ANSI / ISO) / Solder
Plate materials
Aluminum / FR4 / Carbon fiber / PC
Typing angle / Front height
6.5° / 16.80 mm
  • 1 × anodized aluminum top case
  • 1 × anodized aluminum bottom case
  • 1 × through weight bar (copper-colored aluminum, silver-gray aluminum, or copper)
  • 1 × wired PCB of your choice (ANSI hot-swap, ISO hot-swap, or solder)
  • 1 × Ko-Onibi magnetic pogo-pin daughterboard with mounting screws
  • 1 × plate of your choice (aluminum, FR4, carbon fiber, or polycarbonate)
  • 1 × foam set matched to your PCB (optional)
  • 8 × top-mount silicone dampeners
  • 24 × silicone gaskets (8 each in 35A, 50A, and 70A)
  • 1 × PTFE force-break pad
  • 4 × push-in feet
  • Case and weight mounting screws
  • 1 × T6 Torx driver and 1 × T10 Torx driver

Resources

Project updates

GB Date: –
Estimated shipping: Q2, 2027

Firmware

Coming soon

User manual

Coming soon

Plate files

Coming soon

Dimensions

Q&A

Can I reuse my Tofu60 3.0 assembly?

Yes. The Tofu60 3.0 internal assembly fits the Ko-Onibi case directly. Replace its daughterboard with the dedicated Ko-Onibi daughterboard.

Which case layouts does Ko-Onibi support?

Ko-Onibi is a 60% keyboard with WK, WKL and HHKB case options.

How do the two mounting styles feel?

Top mount gives a firmer, more direct feel. PCB gasket mount gives a softer, more isolated feel.

Which PCB options does Ko-Onibi support?

Ko-Onibi supports hot-swap ANSI, hot-swap ISO and solder PCBs.

How does the daughterboard connect to the PCB?

The USB-C daughterboard uses a magnetic pogo-pin connector in place of a JST cable.

Ko-Onibi detail

Customer reviews

Loading reviews…

Sign in to write a review