
MetaPulse
Choose the rounded feel of RS or the stronger tactile bump of BS.
Loading reviews…
Loading options...
Configuration preview
Checkout notice
Electrocapacitive conversion
One EC PCB, two ways to build. Choose the tactile feel you prefer, then match the plate and parts kit to that system.

Choose the rounded feel of RS or the stronger tactile bump of BS.

Choose from three DOEMS weights for a lighter or firmer press.
Already have a Tofu60 3.0? Keep your case and swap in the EC PCB and the plate for your chosen system. The EC parts kit options are sold separately from the case, PCB, and plate. You’ll also need keycaps and lubricant for the stabilizer wires.
Pair the shared EC PCB with the 1.2 mm MetaPulse plate and choose one dome series.

Tofu60 3.0 MetaPulse Plate – Black Aluminum, 1.2 mm

A rounded, moderate tactile bump similar to OEM Hybrid Snow domes. A good fit for longer typing sessions.

Inspired by OG-BKE domes, with a sharp, pronounced bump reminiscent of Type R tactility.
RS is rated at actuation and BS at peak force. BS 40 g can feel close to RS 25 g in overall weight, with a more pronounced bump.

The kit contains parts for one EC assembly. Choose RS or BS domes, and select the dedicated plate and shared EC PCB separately. Use the wire that matches your spacebar layout.
Check the components for one complete MetaPulse EC assembly, including the shared PCB and matching plate.

Shared by both EC systems. Select separately.

1.2 mm · Select separately.







6u, 6.25u, and 7u wires.

Your selected RS or BS series. Blue-Series shown.


120 × 0.5 mm for 1u keys, 5 × 1 mm for 2u keys, and 5 × 0.3 mm spacebar pads.


Pair the shared EC PCB with the DynaCap plate and choose one DOEMS weight.

Tofu60 3.0 DynaCap Plate – Black Aluminum
Translucent silicone with a softer tactile bump and a lighter press.
OEM-inspired red silicone with a classic tactile bump and lively rebound. A good starting point for EC newcomers and familiar territory for longtime HHKB typists.
Translucent black silicone with the firmest press, a rounded bump, a strong rebound, and less key wobble.

The DynaCap kit includes one 7u spacebar wire. A 6u wire is available separately. Check the sizes against your layout when choosing parts and keycaps.
Check the components for one complete DynaCap EC assembly, including the shared PCB and matching plate.

Shared by both EC systems. Select separately.

Select separately.

DynaRed.

Bone.




The separately sold 6u wire is a different item.

Your selected Light, Medium, or Heavy domes. Six per strip.




Small parts such as springs, rings, and screws are counted by hand. DynaCap housings and sliders are also hand-counted. Counts may vary slightly, with enough parts supplied for assembly. Minor count variations that leave enough parts to complete the build are outside after-sales coverage.
Both systems use the Tofu60 3.0 EC PCB. Each aluminum plate has cutouts for the housings of its matching system. The housings snap into the plate for stable support during the downstroke and return.

Remap every key in VIA and put the functions you use most within easy reach.

The plate screws into the top case for direct feedback and a crisp bottom-out.

Silicone supports cushion the PCB edges at positions similar to the top mount points for a softer bottom-out and a slight rebound.
Starting without a Tofu60 3.0? Pair the case kit with one EC assembly. For WK, WKL, or HHKB, check the Enter, Shift, and spacebar sizes for your selected layout.


The green bottom rows show WK, WKL, and HHKB from top to bottom. All three layouts shown use a 7u spacebar.
For keycap coverage, check for a 2.25u Enter, 2.25u left Shift, and a split right Shift with a 1.75u Shift and a 1u key.
For a case-inclusive build, use the hardware below plus one selected EC assembly. The EC assembly includes the shared PCB, matching plate, and one EC parts kit as detailed above.
| Case kit hardware | Quantity |
|---|---|
| Top case, bottom case, aluminum weight, and inner cover plate | 1 each |
| 50A silicone PCB supports | 8 |
| PTFE force-break pads | 1 set |
| Silicone pads for Top Mount | 1 set |
| Case feet | 1 set |
| Screwdriver | 1 |
| T6 and T8 driver bits | 1 set |
| Case assembly screws | 1 set |
| Fitted carrying case | 1 |
These components are available separately for replacements or spares.
Photos are for reference. Use your selected configuration’s checklist for parts. Keycaps and stabilizer-wire lubricant are supplied separately.


Purchasing this product means you accept these terms.
The RAW version is anodized and uncoated. It preserves the original look of the machined metal, including natural tool marks.
The following are acceptable for the RAW finish and are outside warranty coverage.
The RAW finish retains natural machining characteristics. By purchasing a RAW product, you acknowledge and accept these inherent characteristics.

Spin for a little happy moment.
